Single-mode and multimode fibre optic cabling for high-rise risers, campuses, warehouses and data rooms. Spliced, terminated, OTDR tested and documented. For buildings across Vancouver and the Lower Mainland, BC.
Tell us about your building and what you need. We reply fast with next steps and a free site survey.
When copper runs out of reach or speed, fibre takes over.
Fibre between floors and telecom rooms in multi-storey buildings, with firestopping at every penetration.
Connect warehouses, shops and offices on the same site.
Low-loss splices and clean terminations into rack-mount enclosures.
Proof that every strand performs, before you sign off.
Multimode fibre (OM3, OM4) is common inside a building: between telecom rooms, inside server rooms and for shorter backbone runs. Optics are cheaper, and 10-gigabit runs reach roughly 300 m on OM3 and 400 m on OM4.
Single-mode fibre (OS2) goes much further, from hundreds of metres to many kilometres, and has the most room for future speeds. It is our default for building-to-building links, large campuses, carrier hand-offs and any backbone you want to last for decades.
In many projects we install both: single-mode for the long backbone and multimode inside the data room. We also pull spare strands, because labour is the expensive part and extra strands cost very little.
Any run over 100 m, any link between buildings, high-rise risers, areas with heavy electrical noise like manufacturing floors, and uplinks between switches that need 10, 25 or 100 gigabit.
A labelled enclosure at each end, a strand map, OTDR traces and loss results for every strand, and as-built drawings that show where the cable runs. Your next contractor will thank you.
No surprises. You know the scope, price and schedule before we start.
We walk the space, measure routes and note every drop, camera and access point.
You get a clear, itemized quote with drawings and a schedule.
We pull the required permits and install to BC code with WorkSafeBC-covered crews.
Every run is tested and certified. You get test reports, labels and as-built documentation.
Straight answers for property managers, general contractors and business owners.
Yes. We fusion splice pigtails, repair damaged fibre and terminate into rack-mount enclosures.
Single-mode (OS2) for long runs, building-to-building links and long-term backbones. Multimode (OM3/OM4) for shorter runs inside a building or data room. Many projects use both.
Yes. Every strand gets OTDR and insertion-loss testing, and you receive the results with your as-built documentation.
Yes. We install underground and aerial fibre links with outdoor-rated or armoured cable between buildings on the same site.
Our crews cover British Columbia from Vancouver and the Fraser Valley through to Kamloops and the Okanagan.
Vancouver, Downtown Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, New Westminster, Coquitlam, Port Coquitlam, Port Moody
Maple Ridge, Pitt Meadows, Mission, Chilliwack, Hope, Squamish
Get a free consultation and site survey from BC's premier low voltage specialists. Call, start a live chat, or send us a message below. Let's discuss your project requirements and provide a detailed, no-obligation quote.