No more dead zones or dropped calls. We survey, cable and mount Wi-Fi 6, 6E and 7 access points for offices, warehouses, hotels, schools and strata buildings. For buildings across Vancouver and the Lower Mainland, BC.
Tell us about your building and what you need. We reply fast with next steps and a free site survey.
Good Wi-Fi starts with a survey and solid cabling, not more routers.
We measure the building and plan access point locations before anything is mounted.
Reliable video calls and roaming from desk to boardroom.
Coverage for scanners, tablets and forklifts across high racking.
Many users, one network that keeps up.
Patios, yards and links to outbuildings.
We prove the coverage after install, not just promise it.
Too few access points, in the wrong places. One router in a back room cannot cover an office, and consumer mesh units struggle with dozens of users. Business Wi-Fi uses several ceiling-mounted access points, each wired back to a switch.
Walls, glass and racking. Concrete cores, elevator shafts, low-E glass and full warehouse racking all block signal. A site survey finds these before the install, not after.
Weak cabling. Modern access points need power and speed from their cable. We run Cat6a to access points so they can use multi-gigabit uplinks and high-power PoE, now and on the next upgrade.
Wi-Fi 6 handles busy offices well. Wi-Fi 6E and 7 add the 6 GHz band, which has more space and less interference, and is worth it in dense offices, schools and new buildings. We recommend based on your devices and your budget.
No surprises. You know the scope, price and schedule before we start.
We walk the space, measure routes and note every drop, camera and access point.
You get a clear, itemized quote with drawings and a schedule.
We pull the required permits and install to BC code with WorkSafeBC-covered crews.
Every run is tested and certified. You get test reports, labels and as-built documentation.
Straight answers for property managers, general contractors and business owners.
Usually too few access points, poor placement, interference or old cabling. A wireless site survey shows exactly where the problem is.
Yes. We do predictive and on-site surveys before install and a validation survey after, with heat maps you keep.
Yes. We plan coverage around racking, mount access points from lifts and use directional antennas down aisles.
For dense offices and new buildings, 6E or 7 is worth it. For smaller or older sites, Wi-Fi 6 is often enough. We recommend based on your devices and budget.
Our crews cover British Columbia from Vancouver and the Fraser Valley through to Kamloops and the Okanagan.
Vancouver, Downtown Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, New Westminster, Coquitlam, Port Coquitlam, Port Moody
Maple Ridge, Pitt Meadows, Mission, Chilliwack, Hope, Squamish
Get a free consultation and site survey from BC's premier low voltage specialists. Call, start a live chat, or send us a message below. Let's discuss your project requirements and provide a detailed, no-obligation quote.